Table level angle of a small, light brown wooden card index. It has a fine metal relief placard that reads "Remington Rand Library Bureau Div. made in USA". The box has several manilla 1/5 cut 3x5" card dividers inside. Outside of the box on the table in front of it are a typewritten index card and a black metal Rotring 800 0.5mm mechanical pencil. In the background is a white ceramic bowl full of lemons.

Vintage desktop Remington Rand 10 5/8 inch card index for 3 x 5″ cards

I’ve bought (yet another) card index on April 22nd. This must mean that I’m officially a collector, but if I keep this up I may have to start a museum soon.

Close up of a bronze metallic art deco designed plaque on the front of a small card index that reads "Remington Rand / Library Bureau Div." sandwiched in between the words "Made" and "in U.S.A." Two small nails hold the plaque on to the box. In front of the box is a white index card that read in red typewriter print "The power of information" with a quote typed in black below it.

This model is a Remington Rand Library Bureau Division 10 5/8″ x 5 5/8″ x 2″ dovetailed wooden box with steel follower and toothed sliding track. The sides of the box are 1/4″ thick and was designed for 3 x 5 inch index cards. The box has a softer brown color and wider grain typical of the mid-century Remington Rand Library Bureau Division products. Because it is short enough, it can fit inside my larger card catalog filing cabinet if necessary. 

Angle down on a small, light brown wooden card index. The box has several manilla 1/5 cut 3x5" card dividers inside along with some white index cards. Outside of the box on the table in front of it are a typewritten index card and a black metal Rotring 800 0.5mm mechanical pencil. Off to one side is a white ceramic bowl full of lemons.

Given that Remington Rand used the Library Bureau Division brand name from its acquisition in 1927 into the 1950s and the materials and design used, I’m guessing that this model is likely from the late 40s to early 50s. This was likely used as a desktop card index or possibly as a charging tray in a library. Sadly it didn’t come with any information about provenance. With the follower all the way back it’s got 8 1/2 inches for cards which means space for about 1,200 standard index cards.

There are no nail holes on the bottom indicating that it had feet, but it does have the faint appearance that it may have either had felt feet or a felt sheet glued to the bottom to prevent it scratching one’s desktop. As I expect to use it on a glass top, I probably won’t modify it. Beyond this and a few small scuffs showing very moderate use, it’s in exceptionally fine shape.

Bottom of a 10 5/8" card index featuring two wooden slats on the sides and a metal strip down the middle for the card follower inside the box. A faint black item number "6015" is printed on the bottom.

I’d picked up an 11 inch Shaw-Walker card index recently, but I couldn’t help making a knee-jerk purchase of another vintage desktop card index. I got it used on eBay for the pittance of $16, which compared to some of the modern cardboard,  plastic and metal options is honestly a steal, especially since it’s got a much nicer look and permanent feel compared to some of the more “modern” zettelkasten containers. Who wants a $20 cardboard box from Amazon when you can have a solid piece of history made of hard wood and steel on your desk?

Since my father worked in manufacturing for both Ingersoll Rand (no relation) and Remington at different points in his life, its quite a nice reminder of him sitting on my desk on a daily basis. Because it bears the name Library Bureau, it also harkens back to the early days of mass manufactured library card catalog equipment beginning with Melvil Dewey in 1876.

Of course, I ought to quit picking up these 3 x 5 inch card boxes and get some more 4 x 6 inch boxes since I primarily use those on a daily basis. 

Any ideas what I ought to use this box for? Perhaps it ought to be an address card index/rolodex? I’ve already made the decision to do my “memindex” in 4 x 6″ cards and the Shaw-Walker is accumulating cards with jokes and humorous observations (jokerzettel anyone?).

View from the front of an empty Remington Rand card index box toward the back featuring a steel card follower sitting in a steel slider tray with teeth on the right side for adjusting the follower in the box.

View of the back of a tan painted steel card follower in a Remington Rand card index. It has a silver steel button on the top which has a spring loaded pin lever to allow the follower to be positioned in the box at one of approximately 42 evenly spaced teeth in its metal tray.

Of course I now have a small voice inside saying that I need a Remington typewriter on my desk to match it.

Published by

Chris Aldrich

I'm a biomedical and electrical engineer with interests in information theory, complexity, evolution, genetics, signal processing, IndieWeb, theoretical mathematics, and big history. I'm also a talent manager-producer-publisher in the entertainment industry with expertise in representation, distribution, finance, production, content delivery, and new media.

14 thoughts on “Vintage desktop Remington Rand 10 5/8 inch card index for 3 x 5″ cards”

  1. @writingslowly For boxes of this size and type 3×5″ are far easier to come by. In the 6+ months I’ve been watching various searches I have yet to see one of these for 4×6″ cards. (I’m half tempted to buy a 3×5 box, cannibalize the hardware and build a 4×6″ box. 4×6″ boxes are easier to find in wood in larger 4-6 drawer form factors or much more ubiquitous in the metal multi-drawer (2 or 3 drawers) stackable form factors from mid-century to the late 70s. For more options, see The Ultimate Guide to Zettelkasten Index Card Storage
    .

    Mentions

  • 💬 BoffoSocko.com

Leave a Reply

Your email address will not be published. Required fields are marked *